Answers are grounded in this paper and cite their sources.
Experimental evidence confirms that initial damage significantly influences rock creep behavior; however, existing creep models rarely account for instantaneous shear damage induced during shear loading. In this study, multi-stage shear creep tests are conducted on artificial sandstone joints with quantified three-dimensional morphologies under constant normal stress. Results demonstrate that joint roughness parameter E ( θ *| θ *>0 ° )- μ , shear stress level τ / τ p , and normal stress σ n significantly influence the time-dependent shear properties. The degradation of shear resistance, analyzed through its roughness and frictional components, elucidates the mechanism behind the reduction in the long-term shear strength ratio with increasing roughness and normal stress. A novel non-stationary viscoelastoplastic shear model for rough joints is established, explicitly incorporating the time-dependent evolution of shear damage. Within this model, the instantaneous shear damage variable ( D ) governs the subsequent evolution of creep damage, and the derived equivalent shear stress ( τ ′ ) is identified as the key driver of time-dependent shear displacement. Strong concordance between experimental measurements illustrated in the other paper and theoretical predictions validates the model’s predictive efficacy. • Multi-stage shear creep tests on artificial sandstone joints with quantified 3D roughness elucidate the influence of the roughness parameter E ( θ *| θ *>0 ° )- μ , shear stress level τ / τ p , and normal stress σ n on time-dependent shear behavior. • The concepts of an idealized joint and equivalent shear stress ( τ' ) are introduced, identifying τ' acting on undamaged micro-units as the key driver of time-dependent viscoelastic and viscoplastic displacement. • The degradation mechanism of the long-term shear strength ratio ( ξ ) is elucidated by decomposing shear resistance into roughness and frictional components, revealing that higher roughness and normal stress lead to a more pronounced time-dependent reduction in the shear strength. • A non-stationary viscoelastoplastic shear model is developed, explicitly incorporating the instantaneous shear damage incurred during initial loading as a governing factor for subsequent creep evolution. • The model demonstrates strong predictive capability against independent experimental data. A damage evolution index ( α ) is defined, which quantifies the transition between creep hardening, stability, and accelerating failure, providing practical guidance for engineering predictions on rough joints.
No takes yet. Share an insight, caveat, or question.
Song et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: