Answers are grounded in this paper and cite their sources.
This study examines the impact of overloading light-duty vehicles on brake wear particle emissions, addressing a common yet understudied practice in which vans are loaded beyond their gross vehicle weight rating (GVWR). A light-duty vehicle front brake assembly was subjected to 3h-LACT and WLTP (Trip 10) brake cycles on a full-scale brake dynamometer at 100%, 130%, and 160% of GVWR. Particle emissions were measured using several methods simultaneously. Results showed brake rotor temperatures increased roughly proportionally with vehicle mass, with temperatures exceeding 300°C at 160% GVWR during more intensive braking. Particle number emissions per stop exhibited exponential growth above approximately 280°C rotor temperature. At 160% vehicle mass, particle number emissions increased by up to five orders of magnitude for individual braking events, with the most pronounced increases during first runs at elevated mass. The excess emissions consisted predominantly of volatile nanoparticles, likely from thermal degradation of polymer binders in brake pads. A strong history effect was observed, where initial exposure to elevated temperatures depleted volatile materials, resulting in reduced emissions in subsequent runs. These findings demonstrate that vehicle overloading substantially increases brake wear particle emissions, particularly ultrafine particles due to increased temperatures leading predominantly to oxidative wear by thermal degradation of binders. These findings may raise concerns about air quality and public health in areas with high commercial vehicle traffic with overloaded vehicles.
No takes yet. Share an insight, caveat, or question.
Vojtíšek-Lom et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: