Answers are grounded in this paper and cite their sources.
This article presents a unified stability–accuracy co-design framework for power-hardware-in-the-loop simulation (PHILS) of grid-connected inverters. PHILS enables realistic inverter evaluation by integrating a real-time simulator (RTS), power amplifier (PA), measurement sensors, and a device under test (DUT), but computation delay and hardware dynamics can significantly degrade stability and accuracy. To address these challenges, this work develops a systematic methodology incorporating PHILS component modeling, interface selection, and filtering and compensation design. Open-loop transfer-function analysis is employed to evaluate stability through gain and phase margins, while closed-loop analysis is used to quantify magnitude and phase accuracy and guide the co-design process. The framework is experimentally validated using a 500 W laboratory prototype emulating a 250 kW grid-connected inverter model. The resulting configuration achieves gain and phase margins of 11.1 dB and 90.2°, respectively, with magnitude error below 1% up to 570 Hz and phase error below 10% up to 265 Hz. Under active-power variations, the active-power error remains below 1%, while the maximum reactive-power error is 5.88%. These results demonstrate the practical applicability of the proposed stability–accuracy co-design methodology under the tested conditions.
No takes yet. Share an insight, caveat, or question.
Jo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: