Answers are grounded in this paper and cite their sources.
MPA-capped ZnSe quantum dots (QDs) were synthesized via a hydrothermal route and incorporated into a pullulan matrix at loadings of 0.5–4 wt% to prepare nanocomposite films by the solution-casting method. Structural and optical characterization confirmed the successful formation of the nanocomposite films. HRTEM analysis of the powder ZnSe QDs revealed irregularly shaped nanocrystals with dimensions of approximately 2–3 nm and an interplanar spacing of about 3.2 Å. The corresponding SAED pattern exhibited concentric rings assigned to the (111), (220), and (311) planes of cubic ZnSe, confirming their nanocrystalline character. X-ray diffraction analysis of the ZnSe:P films revealed the presence of cubic ZnSe nanocrystals with an average coherent crystallite size of approximately 3.5 nm, while FTIR spectra showed the characteristic vibrational bands of pullulan along with ZnSe- and ligand-related features, indicating effective incorporation of the MPA-capped QDs within the polymer matrix. The surface morphology of the films and the dispersion behaviour of the nanofiller within the polymer matrix were analysed by field-emission scanning electron microscopy. The ZnSe:P films exhibited near-UV effective absorption edges of approximately 380–407 nm and apparent direct optical gaps of approximately 2.97–3.35 eV. The blue-shifted optical response relative to bulk ZnSe, together with the nanoscale dimensions determined by HRTEM and XRD, is consistent with quantum-confinement effects. Under 300 nm excitation, the films displayed blue-violet photoluminescence centred around 390–405 nm. Among the investigated compositions, the 2 wt% ZnSe:P film exhibited the highest absolute emission intensity, whereas the 1 wt% film showed the highest relative photoluminescence quantum yield of approximately 22.7%. Absorption–emission overlap analysis yielded overlap fractions of approximately 31.46% and 53.33% for the 1 and 2 wt% films, respectively, indicating a greater susceptibility to reabsorption at the higher QD loading. Furthermore, continuous UV irradiation produced a gradual enhancement in PL intensity over nearly 20 min, suggesting photoinduced modification or passivation of surface and trap states. Time-resolved photoluminescence measurements revealed concentration-dependent excited-state decay dynamics, with the 1 wt% ZnSe:P film exhibiting the longest average lifetime of approximately 6.23 ns, consistent with its comparatively higher PLQY and favourable excited-state recombination behaviour. The transparent, water-soluble, and flexible nature of pullulan provides an effective host matrix for stabilizing the QDs while maintaining the optical response of the embedded nanocrystals. Overall, the results confirm the material-level UV-responsive luminescent and spectral-conversion characteristics of the ZnSe nanocomposite films, highlighting their potential as down-conversion coatings for future integration with silicon-based UV-sensing platforms.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: