Answers are grounded in this paper and cite their sources.
Aluminum Foam Sandwich (AFS) panels are extensively used in rail transportation, aerospace, and military applications because of their lightweight design, high specific strength and stiffness, and impact resistance. This study investigates the mechanical behavior of aluminum foam-to-aluminum sheet joints fabricated using Bobbin Tool Friction Stir Welding (BT-FSW). Based on the tested welding conditions, a traverse speed of 12 mm/min and a rotational speed of 1250 rpm were selected for joint fabrication. The mechanical properties of the welded panels were evaluated through compression, three-point bending, and interfacial shear tests. The welded sample exhibited a maximum compressive stress of 99.1 MPa at a compressive strain of 0.3135, a maximum load of 7250.8 N in three-point bending, and a maximum load of 2104 N in the interfacial shear test. These results demonstrate the feasibility of achieving direct bonding between the face sheets and the foam core through friction stir welding, without the need for additional adhesives or brazing materials. The findings highlight the potential of BT-FSW as a joining technique for aluminum foam sandwich panels, based on the mechanical responses obtained from the conducted tests.
No takes yet. Share an insight, caveat, or question.
Rezaei et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: