This is the authors' abstract. We don't add key points for this paper.
Back-gate molybdenum disulfide (MoS2) negative-capacitance field-effect transistors (NCFETs) with Zr1-xAlxOy(ZAO)/Al2O3as stacked gate dielectric are fabricated, and the impacts of the Al content and annealing temperature of the ferroelectric ZAO films on the transistor’s electrical properties are thoroughly examined. It is found that an optimal Al content of ~10% and a suitable annealing temperature of ~400∘C can yield MoS2NCFETs with excellent performance of a low subthreshold swing (SS) of 46.8 mV/dec, an elevated ON/OFF current ratio (I_on/I_off) of 1.41 × 106, and a reduced hysteresis of 0.26 V. Moreover, a remote NH3plasma is used to treat the surface of ZAO film and Al2O3match layer, leading to further improvements of device performance:SSlowered to 38.2 mV/dec,I_on/I_offincreased to 5.14 × 106, and hysteresis reduced to 0.06 V. The involved mechanisms are attributed to the passivation of oxygen vacancies within the thin film and dangling bonds at the surface of thin films byNincorporation, which enhances the ferroelectric properties and interfacial quality of the films and in turn enhances the negative capacitance (NC) effect and electrical performance of the relevant NCFETs. Therefore, using low-temperature annealed ZAO as a ferroelectric layer along with NH3-plasma treatment on both ferroelectric film and matching layer is an effective strategy to improve the performance of MoS2NCFETs.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: