Answers are grounded in this paper and cite their sources.
In this work, bottom-gate top-contact zinc nitride/zinc oxide (Zn3N2/ZnO) metal-semiconductor field-effect transistors (MESFETs) are presented. Palladium is used as Schottky gate contact, while aluminum is used as ohmic source/drain contacts. ZnO is used as passivation film. The Zn3N2 and ZnO thin films are deposited at room temperature by radio frequency magnetron sputtering. The ohmic Al/Zn3N2 contacts were analyzed by the transmission line method. Interestingly, the Zn3N2/ZnO MESFETs exhibit a “normally-off” p-type behavior. A possible explanation is an unintentional p-type ZnO:N interlayer film formed at the Zn3N2/ZnO interface. The elemental profile at the ZnO/ Zn3N2 interface revealed an oxygen–nitrogen compositional balance, providing evidence for the possible formation of the ZnO:N interlayer. The device exhibits an ION/IOFF current ratio higher than 103, an off-current ~10-8 A (~10-14 A/cm), a threshold voltage VT ~0.35 V, a maximum transconductance ~1.42 × 10-5 A/V, and a subthreshold slope of 98 mV/Dec.
No takes yet. Share an insight, caveat, or question.
Domínguez et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: