Answers are grounded in this paper and cite their sources.
Thin films have increasing industrial applications and are also in great demand scientifically as they allow to experimentally investigate the atomic structures of grain boundaries (GBs). Frequently, fcc thin films are strongly (111) textured and contain columnar grains separated by tilt GBs. It is widely acknowledged that the deposition parameters affect evolution of the microstructure and, in turn, the properties of fcc thin films. However, the influence of deposition parameters on [111] tilt GB distributions remain largely unexplored. This study examines Al thin films, grown on (0001) oriented sapphire substrates by using e-beam evaporation at varying temperatures (room temperature-300 °C). An experimentally established processing parameter window is developed based on the observed dependence of film density, surface morphology, texture, grain size, and GB morphology on the deposition conditions. The aim is to obtain Al films with smooth and dense surfaces, uniform thickness, large grain size (>10 μm), and a wide distribution of [111] columnar tilt GBs. Systematic characterization of the resulting microstructures by scanning/transmission electron microscopy (S/TEM) therefore identifies a processing window near or above 300 °C at 3 Å/s for obtaining columnar grains with a common surface normal required for atomic-resolution investigations. Atomic-resolution STEM imaging with atomistic simulations elucidate the structures of [111] low-angle tilt GBs for varying misorientation angles. The atomic-scale dislocation configurations at the GBs are characterized to understand the relationship between dislocation structures and boundary geometry.
No takes yet. Share an insight, caveat, or question.
Saood et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: