Answers are grounded in this paper and cite their sources.
This study presents a novel additive manufacturing-enabled strategy for enhancing fatigue life in monolithic metals through location-specific extrinsic toughening. Compact tension specimens of 18Ni(300) Maraging steel were fabricated using laser powder bed fusion, incorporating unbonded, dog-bone-shaped ligament features strategically placed along the anticipated crack path. These ligaments remain mechanically inactive until the advancing crack bypasses them, at which point they engage and act as crack-bridging elements, reducing the effective stress intensity at the crack tip. Three ligament types—Rounded-End, Flat-End and Integrated ligaments—were investigated across various diameters to evaluate the influence of geometry on fatigue performance. Experimental fatigue crack growth tests revealed up to 57% local reduction in crack growth rate and fatigue life extension of up to 13%, primarily in rounded-end specimens. Crack closure and bridging were identified as the dominant toughening mechanisms, with early-positioned ligaments proving most effective. Surface roughness of fabricated ligaments emerged as a critical limitation, leading to premature fatigue failure in some designs. The findings demonstrate, for the first time, that geometry-driven location-specific extrinsic toughening can be systematically implemented in a single-phase metal via additive manufacturing, offering a new design tool for localized, architecture-based damage tolerance in structural alloys that cannot be realized through conventional methods.
No takes yet. Share an insight, caveat, or question.
Shojaati et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: