Answers are grounded in this paper and cite their sources.
The influence of In 2 S 3 /B-Si interface engineering on the structural, dielectric, impedance, and charge-transport properties of Ag/In 2 S 3 /B-Si/Al heterojunction diodes was systematically investigated. Boron-doped silicon wafers were textured using KOH/Isopropyl alcohol (IPA), Na 2 CO 3 , and Na 2 CO 3 /NaHCO 3 alkaline solutions before In 2 S 3 deposition by thermal evaporation. FE-SEM analysis revealed pronounced variations in surface morphology and pyramid structure, accompanied by reduced optical reflectance and modified interfacial characteristics. AC conductivity measurements over 50 Hz–8 MHz and 293–353 K followed Jonscher's universal power law and exhibited two distinct frequency regimes, indicating different hopping contributions. The temperature-dependent frequency exponent supported correlated barrier hopping (CBH) as the dominant transport mechanism, with low-frequency conduction mainly associated with localized states at the In 2 S 3 /B-Si interface and high-frequency conduction attributed to short-range hopping within the In 2 S 3 layer. Impedance spectroscopy further distinguished bulk and interfacial contributions and revealed a strong dependence of the interfacial resistance on the Si texturing conditions. Temperature-dependent current–voltage measurements indicated thermally activated transport and barrier inhomogeneity at the heterointerface. Overall, the results demonstrate that alkaline surface texturing provides an effective approach for tailoring interfacial and charge-transport properties in Ag/In 2 S 3 /B-Si/Al heterojunction diodes, highlighting their potential for optoelectronic and photovoltaic applications.
No takes yet. Share an insight, caveat, or question.
Yassin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: