Answers are grounded in this paper and cite their sources.
To mitigate the high drying shrinkage that severely restricts the practical application of alkali-activated coal gangue-slag (AACGS) composites, this research investigated the potential integration of ground granulated blast furnace slag (GGBS) and carbonation curing for enhancing the performance of AACGS. A carbonation regime of 20% CO₂ concentration, 60 ± 5% relative humidity, and 20 ± 2 °C for 12 h was adopted. Key properties were tested, including setting time, fluidity, compressive strength, drying shrinkage, capillary water adsorption. Microstructural evolution was analyzed using XRD, TG-DTA, MIP, and SEM tests. The results indicated that while increasing the GGBS content enhanced strength and impermeability, it exacerbated drying shrinkage. The mixture containing 70% GGBS achieved a 28-day compressive strength comparable to that of the pure-GGBS mixture while retaining 30% coal gangue. Carbonation curing can partially mitigate excessive drying shrinkage, reducing the 56-day drying shrinkage by 2.28–14.6%, enhancing the compressive strength by 4.85–9.32%, and improving resistance to capillary water adsorption by 2.77–4.46%. A higher GGBS content promoted the formation of calcium (alumino) silicate hydrate (C-(A)-S-H), which interpenetrated with the sodium aluminosilicate hydrate (N-A-S-H) network to form a denser matrix. Meanwhile, carbonation facilitated the transformation of Ca(OH)₂ and C-(A)-S-H into CaCO 3 , contributing to pore-structure refinement. The results show that the synergistic effects of GGBS and short-duration carbonation curing can improve the mechanical performance and dimensional stability of AACGS while maintaining a relatively high level of coal gangue utilization, providing a practical basis for mix design and optimization of carbonation curing.
No takes yet. Share an insight, caveat, or question.
Qin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: