Answers are grounded in this paper and cite their sources.
Reliable simulation of operating parameters is a very demanding problem to be solved prior to developing electron-vacuum devices. One of the most challenging simulation tasks is how to estimate high-frequency losses and take them properly into account. In this paper, we suggest using optical microscopy methods to analyze surface roughness in the klynotron's slow-wave structures manufactured by electro discharge machining, and simulate the thermal load on the components of such slow-wave structures for the wave ranges of 2 mm, 0.75 mm and 0.33 mm. This research allowed us to estimate the high-frequency ohmic losses in slow waves, taking into account the surface roughness of real slow-wave structures. The temperature gradient was determined both along the segment's height and along the comb base. The dependence between an electron beam precipitated at the slow-wave structure and the electric conductivity of its surface layer has been estimated. The found values of the high-frequency ohmic loss have been used to simulate klynotron's output power relative to the operation beam current at a fixed operation frequency. The operation characteristics of 136 GHz and 301 GHz klynotrons obtained in the experiments and simulations were in a good agreement both in terms of quality and quantity.
No takes yet. Share an insight, caveat, or question.
Kovshov et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: