Answers are grounded in this paper and cite their sources.
Aviation turbo-generator hybrid power systems hold significant potential for improving the energy efficiency of aerial transportation and reducing environmental impact. However, conventional liquid-cooling systems impose substantial penalties in system volume, weight, and reliability, which are critical considerations in aviation applications. This study presents a fully air-cooled, axially integrated hybrid-electric design that eliminates liquid-cooling components and auxiliary fans by harnessing the suction effect at the compressor inlet to drive the cooling airflow. The integrated cooling path draws ambient air sequentially through the generator drive, the generator stator and rotor, and finally into the engine intake, thereby integrating the thermal management of the generator drive, generator, and engine intake within a single passive flow. The proposed design is evaluated through numerical simulations and system-level analysis in terms of aerodynamic, thermal, and overall system performance. Under the specific baseline configuration adopted for comparison, the proposed system achieves a 50% reduction in volume and a 10.9% reduction in weight relative to the selected liquid-cooled reference configuration, while maintaining the required output power. The thermal analysis further shows that the winding and permanent-magnet temperatures remain below their respective design limits during steady-state operation at 250 kW and after 5 min of transient overload operation at 350 kW. In addition, the rotor ventilation holes reduce the permanent magnet temperature by 43.6% compared to liquid-cooled designs without dedicated rotor cooling. Moreover, the integrated cooling channel maintains a total-pressure loss below 2.9% across the operating range, and the cooling-flow split between the rotor and the air gap remains nearly constant, which simplifies part-load thermal management. These findings preliminarily indicate the aerodynamic and thermal viability of the proposed design for high-power-density aviation turbo-generator systems, offering strong engineering potential for lightweight and compact aircraft power applications.
No takes yet. Share an insight, caveat, or question.
Zou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: