This is the authors' abstract. We don't add key points for this paper.
Improving air–solution contact within a compact contactor is a key challenge in liquid-desiccant air-conditioning systems. This study experimentally evaluated an open-cell aluminum-foam contactor using an ionic-liquid desiccant and developed a modeling framework linking component-scale performance to building heating, ventilation, and air-conditioning simulations. The 20-pore-per-inch metal foam was operated under adiabatic two-fluid conditions without internal cooling. Experiments conducted at an inlet air temperature of 34 °C and humidity ratio of 19.5 g kgda −1 demonstrated dehumidification under all tested conditions, although non-uniform solution distribution and partial wetting limited utilization of the nominal surface area. A two-dimensional heat and mass transfer model incorporating an effective wetting ratio reproduced the experimental outlet air temperature and humidity ratio with mean absolute errors of 0.657 °C and 0.503 g kgda −1 , respectively. An effectiveness–number of transfer units based reduced-order model reproduced the parent detailed-model outputs with mean absolute errors of 0.409 °C and 0.192 g kgda −1 , respectively. In a preliminary summer office case study in Tokyo, the liquid-desiccant-assisted configuration reduced the considered heating, ventilation, and air-conditioning subsystem power from 4.83 to 2.82 kW while maintaining 26 °C and 45% relative humidity. The results demonstrate the feasibility of metal foam as a compact liquid-desiccant contactor while identifying effective wetting and liquid distribution as key factors for realizing its surface-area advantage.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: