Answers are grounded in this paper and cite their sources.
Phase change materials (PCMs) offer a wide range of applications, particularly in thermal management systems and thermal energy storage. However, these PCMs are subject to several limitations. Supercooling (delay in the crystallization) is one of these drawbacks. This phenomenon can adversely affect system performance by delaying the onset of nucleation and thereby reducing the effective utilization of latent heat. Supercooling depends on multiple parameters, and a deeper understanding of these parameters is crucial for enhancing the efficiency of thermal energy storage (TES) systems. However, existing studies often report inconsistent trends for some of the experimental parameters due to differences in experimental methodologies, and the influence of measurement techniques, particularly thermocouple placement, remains insufficiently understood. To address these limitations, this study investigates the degree of supercooling of type 2 pure water under controlled and comparable conditions. First, the measurement method was optimized by evaluating the effect of thermocouple placement, which revealed that internal placement reduces the measured supercooling degree. To accurately determine the nucleation temperature, an external thermocouple and CFD simulations were employed. Using this improved approach, the effects of cooling rate, water volume, and container surface roughness were examined. Within the investigated configurations cooling rate had a negligible effect, whereas larger volumes and higher surface roughness reduced the degree of supercooling.
No takes yet. Share an insight, caveat, or question.
Rabbi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: