Answers are grounded in this paper and cite their sources.
This study presents a transient model of self-pressurizing propellant tanks for vapor discharge that accounts for flashing of the superheated liquid. The model was validated against 120-s discharges of carbon dioxide, a surrogate for nitrous oxide, from a 70.2 L tank through three orifices (3.1, 2.5, and 2.0 mm) at up to 92.6 g/s. The tank is represented by four lumped control volumes (liquid, vapor, and two wall sections) in thermal non-equilibrium, with the vapor treated as a real gas. Within the model, vaporization proceeds by interfacial evaporation before flashing and volumetrically throughout the bulk liquid afterward, each with one calibrated parameter. The onset of flashing follows from a heterogeneous-nucleation criterion fixed by the pre-discharge liquid state, with no fitting parameter. With one pair of calibrated parameters, the model reproduces the ullage pressure, vapor discharge rate, and liquid temperature of all three cases to within 2.2%, 3.6%, and 1.5 K. It also captures the transition in the depressurization regime at the onset of flashing. When the flashing mechanism is disabled in the model, this transition is lost, the ullage-pressure deviation rises to 8.0%, and the cumulative discharged mass is underpredicted by up to 6.7%. The vapor temperature is underpredicted because a single vapor node cannot resolve the ullage stratification. The two parameters were calibrated for carbon dioxide and require re-calibration for other propellants and tanks. With its low computational cost, the proposed model is expected to serve as an efficient and practical design tool for self-pressurizing propulsion systems.
No takes yet. Share an insight, caveat, or question.
Jun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: