Answers are grounded in this paper and cite their sources.
To improve the weak interfacial transition zone (ITZ) associated with coal gangue (CG) aggregates while promoting industrial solid waste valorization and carbon reduction, a synergistic modification strategy combining red mud (RM) substitution (8–24%) and in-situ CO₂ mineralization during mixing was proposed. The coupled effects of RM dosage and CO₂ flow rate (250–750 mL/min) on mechanical properties, hydration products, pore structure, ITZ characteristics, and environmental performance were investigated. Results showed that appropriate RM incorporation enhanced matrix compactness through micro-filling and secondary hydration, while also promoting the heterogeneous nucleation of CaCO₃ during mineralization. The optimal combination of 16% RM and 250 mL/min CO₂ achieved a 28-day compressive strength of 24.78 MPa, 7.97% higher than the corresponding non-mineralized specimen. Microstructural analyses demonstrated that controlled mineralization refined the pore structure, reduced the volume of harmful pores (>50 nm), and decreased the ITZ width to 18μm. However, excessive mineralization increased harmful-pore volume and induced degradation of hydration products, including C-(A)-S-H decalcification and partial destabilization of ettringite, thereby weakening the cementitious skeleton and resulting in strength deterioration. Additionally, the optimal mixture exhibited a carbon emission intensity of 486.68 kg CO₂-eq/t, corresponding to a 24.12% reduction relative to the control mixture. These findings demonstrate that RM-assisted in-situ CO₂ mineralization is an effective strategy for simultaneously enhancing ITZ quality, mechanical performance, and carbon reduction, providing a promising route for the production of sustainable low-carbon construction materials.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: