Answers are grounded in this paper and cite their sources.
Offshore medium-to-deep edge-water heavy-oil reservoirs face challenges in high-pressure steam flooding due to restricted steam-chamber expansion and uncertainty in adaptability evaluation. This study focuses on steam flooding after cyclic steam stimulation in horizontal wells. Based on steady-state energy conservation, an analytical model for the extreme steam-chamber is established considering radial and vertical heat losses, and the dimensionless steam-chamber radius ratio is defined. Two-dimensional physical simulations under different pressures reveal high-pressure suppression and chemical-composite enhancement. A field-scale numerical model analyzes the effects of conversion pressure, aquifer volume, viscosity, and well spacing on the extreme steam-chamber radius ratio. The effective chamber range is defined by ≥20% incremental recovery and ≥0.12 oil–steam ratio. Adaptability charts for various aquifer volumes are constructed by comparing the extreme steam-chamber radius ratio and the effective chamber range. The results show that increasing pressure from 5.0 MPa to 7 MPa reduces the ratio from 0.40 to 0.32, while nitrogen-foam composite raises it to 0.36. A larger aquifer, higher viscosity, and wider spacing reduce the normalized chamber scale under the investigated conditions. The charts divide reservoirs into suitable, partially suitable, and unsuitable zones; weak-aquifer, low-pressure, low-viscosity, and small-spacing cases match the effective chamber range, but the suitable zone shrinks with a larger aquifer. The method supports conversion timing, pressure optimization, well-pattern adjustment, and combined measures for offshore edge-water heavy oil. The charts provide preliminary screening for similar pore-type reservoirs under the adopted technical and economic criteria.
No takes yet. Share an insight, caveat, or question.
Du et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: