Answers are grounded in this paper and cite their sources.
This work presents the development and validation of a modular high-temperature geopolymer-based thermal energy storage (GeoTES) system operating above 600 °C. The prototype consists of a 3 × 3 assembly of geopolymer modules produced from industrial brick/roof tiles waste and equipped with electrical heating and external insulation. Thermal performance was assessed through two consecutive charging–discharging cycles under controlled laboratory conditions. The heated-heated interface reached a mean peak temperature of 614 °C with highly reproducible heating dynamics, while boundary temperatures remained limited to a mean of 75 °C, confirming effective thermal containment. Heat penetration into the central passive module was uniform, and a comparison between axis-aligned and corner interfaces showed no clear directional dependence under the tested conditions. Differences between axis-aligned and corner interfaces were small relative to overall gradients. Cooling profiles were smooth and repeatable, demonstrating short-term stability under cyclic high-temperature exposure. A three-dimensional transient heat conduction model reproduced the main experimental trends, including internal gradients and boundary attenuation. The simulation and measurement support the conduction-dominated behaviour and the scalability of the modular concept toward larger high-temperature thermal energy storage systems.
No takes yet. Share an insight, caveat, or question.
Georgiou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: