This is the authors' abstract. We don't add key points for this paper.
This study concerns with a modelling led-design of a novel mobile thermal energy storage (M−TES) device aimed to address off-site industrial waste heat recovery and reuse in the UK. For the first time, salt-based composite phase change material (CPCM) modules were employed as the M−TES medium, utilizing air for charging and discharging. Two-dimensional (2D) and three-dimensional (3D) computational fluid dynamics (CFD) models were initially developed and validated against experimental data. The 2D model was used for parametric study to determine critical M−TES dimensions, followed by the 3D model for a comprehensive evaluation of thermal performance of the M−TES device. Key parameters examined included temperature uniformity within CPCM modules, evolution of air temperatures at the inlet and outlet, thermal storage capacities, charging/discharging rates, and specific efficiencies defined as heat transfer efficiencies and charging/discharging efficiencies throughout a complete cycle. The results under baseline conditions demonstrated that the M−TES device stored nearly 400 MJ of heat with a TES density of 560 kJ/kg after 10 h of charging, achieving an average CPCM temperature of 662 K. Approximately 97 % of the stored heat was released with the average outlet air temperature exceeding 468 K during the subsequent 10-hour discharging period. This work preliminarily verified the feasibility of the novel M−TES concept for integrating industrial thermal processing decarbonization with domestic heat supply.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: