This is the authors' abstract. We don't add key points for this paper.
Achieving strength-ductility and functional integration is a key issue to promote the application of alloys in the field of functional materials. CoFeNiCrxAl1−x alloys exhibit excellent magnetic and corrosion resistance properties; however, their mechanical properties remain underexplored and insufficiently understood. In this work, the microstructure and mechanical properties of CoFeNiCrxAl1−x alloys were investigated, and their intrinsic deformation mechanisms were elucidated. The results indicate that as Cr is gradually replaced by Al, the phase structure transforms from a single-phase face-centered cubic (FCC) structure to a dual-phase FCC and body-centered cubic (BCC), and finally to a BCC/B2 structure. Mechanical tests demonstrated that alloy hardness rises with higher Al content, with the Cr0Al1 alloy exhibiting a hardness approximately 3.3 times greater than that of the Cr1Al0 alloy. Notably, the Cr0.5Al0.5 alloy exhibits an optimal strength-ductility balance, with a yield strength increase in about 60% to 248 MPa and tensile strength increase in about 36% to 610 MPa, while maintaining nearly the same ductility as the Cr1Al0 alloy. The deformation mechanisms were found to be driven by solid solution strengthening due to severe lattice distortion, a high dislocation density resulting from reduced dislocation formation energy, the second-phase strengthening and interface strengthening via the micrometer-scale BCC phase, and twin-induced plasticity induced by the reduced stack fault energy. This work broadens the potential applications of CoFeNiCrxAl1-x alloys as versatile engineering and magnetic functional materials.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Song et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: