This is the authors' abstract. We don't add key points for this paper.
This study investigates the mechanical and thermomechanical response of quartz-fibre-reinforced polymer (QFRP) sandwich structures incorporating additively manufactured gyroid cores. Three core variants were considered under the same nominal gyroid topology and 28% infill setting: chopped-carbon-fibre-reinforced polyphthalamide (PPA-CF), chopped-carbon-fibre-reinforced ONYX, and ONYX incorporating additional continuous carbon-fibre reinforcement (ONYX-R). Identical QFRP face sheets manufactured from woven quartz-fibre/cyanate-ester prepreg were co-cured directly onto the printed cores without a separate adhesive film. The resulting sandwich structures were characterized by flatwise compression, three-point bending, and dynamic mechanical analysis (DMA). Under flatwise compression, QFRP-ONYX-R exhibited the highest yield strength, 12.45 ± 0.16 MPa, followed by QFRP-PPA-CF at 11.70 ± 0.10 MPa, whereas QFRP-ONYX yielded at 2.00 ± 0.09 MPa. QFRP-PPA-CF exhibited the highest nominal maximum bending stress (131.55 ± 3.50 MPa) and apparent bending modulus (7.32 ± 0.07 GPa), while QFRP-ONYX-R showed an intermediate flexural response and QFRP-ONYX exhibited the greatest deformation capacity before break. DMA revealed a strong dependence of the apparent structural response on core configuration. QFRP-PPA-CF exhibited the highest storage modulus, approximately 8.4 GPa at 30 °C, and retained approximately 1.9–2.0 GPa at 160 °C. QFRP-ONYX-R displayed intermediate stiffness but the highest principal tan δ response, with peaks of 0.135–0.150 at approximately 97–100 °C, whereas QFRP-ONYX exhibited the lowest storage and loss moduli. Overall, the results show that, under a nominally similar gyroid architecture, core material and reinforcement strategy strongly modify compressive yielding, bending behaviour, apparent thermomechanical stiffness, and damping in QFRP-faced sandwich structures.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Buga et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: