Answers are grounded in this paper and cite their sources.
Author: A series of novel intrinsically flame-retardant thermoplastic poly(imide-urethanes) (TPIUs) has been synthesized by 4,4′-diphenylmethane diisocyanate (MDI), poly(tetrahydrofuran) (PTMG), pyromellitic anhydride (PMDA), and hydroxyl-terminated poly(dimethylsiloxane) (PDMS) used as flame retardants. The obtained TPIU/PDMS exhibited good tensile strength and elongation at break. TPIU/PDMS has a higher thermal decomposition temperature than that of commercial PTMG–MDI–1,4-butanediol-based thermoplastic polyurethane (TPU) according to thermal gravimetric analysis. The total heat released and peak heat release rate of TPIU/12.4%PDMS were found to be lower than those of the pure TPIU by 8.0% and 26.3%, respectively, based on cone calorimeter testing. The condensed phase of TPIU/PDMS has been investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, and energy-dispersive X-ray spectroscopy. The results indicate that the good flame retardancy of TPIU/PDMS can be attributed to thermally stable compounds with Si–O structures on the surface of its char layers.
No takes yet. Share an insight, caveat, or question.
Tang et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: