Answers are grounded in this paper and cite their sources.
Copper–graphene composites are promising for heat sink applications due to their high thermal conductivity and mechanical strength. However, producing defect-free components via metal injection molding remains challenging because solvent debinding and sintering parameters strongly affect densification and microstructure. This study investigates the influence of solvent debinding temperature and sintering dwell time on the physical and mechanical properties of Cu–GNP composites. GNP-PW cake was first prepared using sonication to disperse the GNP in PW uniformly. Four feedstocks, pure copper, 0.10 vol.%, 0.50 vol.%, 1.0 vol.% were substituted for copper to maintain the total sold content, 59 v% and remaining was 41 v% binder. The feedstocks were injection molded to produce heat sink test samples of dimensions 15 mm diameter and thickness of 4.25 mm with sintering shrinkage allowance of 15-20%. Molded test samples were solvent debound in n-heptane at 50–60℃ to remove soluble species of binder (PW and SA), followed by thermal debinding and sintering at 1050℃ for dwell time of 90–180 min. Debinding at 55℃ was found optimal, while 60℃ caused surface cracking. A heating rate of 3℃ min -1 during sintering produced test samples without blisters and cracks. The sintered test samples were characterized for physical, mechanical and thermal properties. GLM-based ANOVA showed that GNP content and dwell time significantly affected relative density, linear shrinkage, and microhardness (p < 0.05), with R 2 values above 92%. The sintered 0.10 vol.% GNP/Cu at 1050℃ and dwell time of 120 min. produced 95.69% relative density and 79.7 HV. A 1.0 vol.% GNP/Cu composite achieved the highest thermal conductivity of 482.44 W/m·K at 30℃ and 526.91 W/m·K at 200℃ compared with sintered Cu 321.26 and 366.56 W/m·K, respectively.
No takes yet. Share an insight, caveat, or question.
Shahzad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: