Answers are grounded in this paper and cite their sources.
This study explores the glycolysis of virgin polyethylene terephthalate (vPET) using zinc oxide (ZnO) as a catalyst under both conventional and microwave (MW) heating. The main objective is to optimize key experimental parameters (temperature, time, catalyst concentration and EG/PET ratio) for each technology, while maximizing PET degradation and BHET yield and purity. Under conventional heating, a PET degradation of 98.5% and a BHET yield of 83.4% were achieved at 190°C after 8 h, with 0.5 wt% ZnO and an EG/PET ratio of 3.5. Under MW heating, a PET degradation of 92.7% and a BHET yield of 80.2% were obtained at 210°C after 1 h, with 0.33 wt% ZnO and an EG/PET ratio of 5.5. ZnO therefore proved effective under both heating technologies, yielding BHET with purities above 95% in both cases. These results position MW-assisted glycolysis as a promising alternative for the closed-loop recycling of PET.
No takes yet. Share an insight, caveat, or question.
Franco-Mateos et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: