Answers are grounded in this paper and cite their sources.
Purpose: This study evaluates the safety and operational implications of revising the oxygen acceptance criterion for nitrogen purging from below 0.5% to below 1% during refinery commissioning. The objective is to determine whether the revised criterion can reduce nitrogen consumption and direct cost while maintaining an adequate safety margin. Methodology: A quantitative case-study design was applied to a fuel-gas transfer system within a large-scale refinery development project in Indonesia. The study compared a design-based baseline criterion of below 0.5% oxygen with a field-implemented criterion of below 1%. Data included oxygen concentration, purging pressure, number of cycles, nitrogen volume and mass, and direct nitrogen cost. Batch-purging calculations, field measurements, Limiting Oxygen Concentration (LOC) analysis, cost comparison, and Failure Mode and Effects Analysis (FMEA) were employed. Results: The revised criterion was achieved after six purging cycles with a measured oxygen concentration of 0.96%, whereas the baseline criterion required eight calculated cycles. Nitrogen consumption decreased from 3,000 to 2,381.25 m3, generating direct cost savings of IDR 25,059,375 or 20.62% per system. FMEA identified single-point oxygen sampling as the highest-priority risk with an initial Risk Priority Number (RPN) of 240. Conclusion: The revised criterion improved nitrogen-use and cost efficiency while remaining below the lowest applicable LOC under the evaluated conditions. Its implementation requires multi-point oxygen measurement, system-specific procedures, and competent personnel. Originality: This study integrates field measurement, process-safety evaluation, engineering cost analysis, and structured risk assessment in determining an oxygen acceptance criterion for refinery commissioning.
No takes yet. Share an insight, caveat, or question.
Azwardani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: