Answers are grounded in this paper and cite their sources.
In this article, supercritical carbon dioxide (scCO(2)) is used to form a high density microcellular foam structure to reduce the polymer use and facilitate dispersion of Mg(OH)(2) and Nanoclay fillers. A twin-screw extruder system was used to predistribute the inorganic filler from the PP polymer, resulting composite PP/filler pellets. This followed by the use of a single-screw extruder wherein supercritical carbon dioxide is introduced in the formulation. Finally the resulting foam PP/filler/CO2 pellets are injection molded into test samples. The structure and properties of the composites are characterized using a scanning electron microscopy (SEM), Differential scanning calorimetry (DSC), and density measurements. Furthermore, PP/Clay/Mg(OH)(2) polymer composites are subjected to examinations to obtain their yield and tensile strengths, elasticity modulus, % elongation, Izod impact strength, hardness, Heat deflection temperature (HDT), Vicat softening point and Melt flow index (MFI).
No takes yet. Share an insight, caveat, or question.
Taşdemi̇r et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: