Answers are grounded in this paper and cite their sources.
This paper presents a simple and easy to build fiber‐optic acoustic detector based on an unbalanced Single‐Arm Fiber‐Optic Interferometer (SAFI). The latter can be described as a low‐finesse Fabry‐Perot structure. The sensing cavity was easily created when a weakly (0.01%) reflective FC/PC connection couples a piece (< 2 m length) of a singlemode pigtail fiber with an optical circulator. The other end of the sensing fiber‐cavity (s‐fiber) was orthogonally cleaved thus reflecting a power fraction over 3.5%. This simple and highly unbalanced SAFI can work as an acoustic detector. When a fusion splice was performed instead of the FC/PC connection no acoustic detection was observed. Characterization of acoustic sensitivity around 42.9 kHz frequency was carried out while varying the length of the loose s‐fiber from 175 to 195 cm yielding a sensitivity increase. Similar results, but with quite reduced amplitude were achieved when the s‐fiber was tight . In order to demonstrate the feasibility of the proposed interferometer as an acoustic detector, a 2‐FSK digital transmission through a 0.51‐m‐long solid aluminum rod was performed, with no detected bit errors in several 2‐kbit bursts at a rate of 1.2 kbit/s, using a 30‐ms symbol interval comprising the bit slot and guard band.
No takes yet. Share an insight, caveat, or question.
Santos et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: