Answers are grounded in this paper and cite their sources.
The growing accumulation of non-biodegradable synthetic plastic waste has intensified the urgent need for sustainable, bio-based alternatives. This study focuses on the valorization of underutilized Enset ( Ensete ventricosum ) fiber, an abundant agricultural residue in Ethiopia, into high-performance cellulose nanocrystal (CNC) as a green reinforcing agent for biodegradable packaging applications. A multi-step extraction protocol was employed, involving Soxhlet dewaxing, two-stage alkaline treatment, chlorine-free hydrogen peroxide bleaching, and acid hydrolysis followed by ultrasonication. The hydrolysis parameters (acid concentration, temperature, and time) were thoroughly optimized using Response Surface Methodology (RSM) based on a Box-Behnken design (BBD) to maximize CNC yield and minimize particle size. The optimized conditions (59.90% H 2 SO 4 , 77.93 ℃ , 63.22 min) yielded CNC with a high yield of 73.50 ± 3.2 wt% and a mean hydrodynamic diameter of 63.22 ± 6.5 nm. The model confirmed excellent reliability (R² = 0.988). Advanced characterization via FTIR, XRD, SEM, DLS, TGA/DTG, and BET confirmed the successful removal of amorphous components. FTIR indicates the newly produced CNCs is very much rich with active sites like –OH, -C-O-C-,while SEM exposed the raw fiber surface was rough, whereas the surface of CNCs became even after the removal of lignin, fatty, and waxy compounds. Crystallinity index of 82.09 ± 5.1%. Mechanical testing of neat CNC films demonstrated a tensile strength of 150 ± 2.1 MPa, confirming their load-bearing capacity the resulting CNC exhibited low water vapor (30 ± 3.1 g/m²·day), oxygen (2.3 ± 5.2 g/m²·day·atm), and grease (<0.12 g/m²·day) transmission rates, confirming their barrier performance. These findings establish enset fiber as a sustainable, high-value feedstock for CNC production, with significant potential for subsequent development in biodegradable packaging and nanocomposite applications, contributing to agricultural waste valorization and the circular bio-economy in Ethiopia. Continued advancements in integrating CNCs into diverse applications hold significant potential to transform industries seeking sustainable, high-performance materials.
No takes yet. Share an insight, caveat, or question.
Fersha et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: