Answers are grounded in this paper and cite their sources.
Wire bonding enables miniaturization in microelectronic packaging, enhancing reliability by ensuring fine wires with critical physical, thermal, electrical, and mechanical performance for improved yield. This paper examines key properties of fine bonding wires, including: 1. Fusing currents were evaluated for doped gold (4N Au), alloyed gold (2N Au), alloyed copper (2N Cu), palladium-coated copper (CuPd), alloyed silver (1N Ag), and gold-coated silver (AuAg) wires over lengths of 0.5–10 mm and diameters of 15–50 μm (0.6-2mil). For example, a current of 260 mA was measured for an 18 μm 4N Au wire at a 10 mm length. 2. Electrical resistivity was measured using Resistomat 2316. For instance, a value of 2.32 μΩ·cm was obtained for a 0.7 mil soft 2N Cu wire. 3. Tensile strength (stress) and elongation (strain) were determined using an Instron testing system. 4. Melting point and specific heat capacity (Cp) were measured using fine wire samples. For example, a melting point of 1073 °C and Cp of 0.376 J/g˚K, were obtained for a 0.7 mil soft 2N Cu wire. 5. Thermal conductivity (TC) and coefficient of thermal expansion (CTE) were measured using fine rod samples. For example, TC of 235 W/m˚K and CTE of 14.9 ppm/˚K, were obtained for an 18 μm soft 2N Cu wire. 6. Alpha particle emission in solid-solution-strengthened gold wires (4N Au, 2N Au) is expected to be below 0.0002 CPH/cm².
No takes yet. Share an insight, caveat, or question.
Murali et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: