Answers are grounded in this paper and cite their sources.
Chiplet‑based heterogeneous integration has become a key packaging approach for high‑performance artificial intelligence systems; however, assembly‑induced warpage, stand‑off height (SOH) non‑uniformity, and accelerated intermetallic compound (IMC) growth remain major challenges in large‑area modules. These issues are primarily driven by a mismatch in the coefficient of thermal expansion (CTE) and non‑uniform heat distribution during solder bonding. This study introduces a Reverse Laser Thermo-Compression bonding (R-LTC) scheme based on thermal inversion, in which heat is delivered from the substrate side rather than the chiplet side. This approach fundamentally modifies the heat flow path in heterogeneous structures, mitigating thermal gradients induced by mismatches in thermal conductivity. A systematic comparison of reflow, Top Laser-Assisted Bonding (T-LAB), Reverse Laser-Assisted Bonding (R-LAB), Thermo-Compression Bonding (TCB), and R-LTC was conducted under conditions where the edge Cu-pillar bump temperature reached 245 ± 5 °C. The results demonstrated that conventional approaches have difficulty simultaneously achieving thermal uniformity and minimizing thermomechanical stress in heterogeneous structures, highlighting a critical limitation in current bonding technologies. Under the same conditions, R-LTC demonstrated a significant reduction in temperature non-uniformity (ΔT reduced from 52 °C to 4 °C) and suppressed IMC thickness by ~26% compared to TCB, while maintaining comparable SOH control and warpage behavior. This substrate-driven heat flux homogenization, together with reduced thermal exposure time, minimizes diffusion-driven interfacial reactions and is expected to reduce thermomechanical stress, as supported by simulation results showing decreased von Mises stress. This study demonstrates that thermal inversion is a promising design approach for bonding processes, enabling scalable and reliable heterogeneous integration for next-generation 2.5D/3D packaging.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: