Answers are grounded in this paper and cite their sources.
The deformation properties of woven textile materials depend on several factors. The main factors are the physical and mechanical properties of the yarn, the weave of the fabric and the density of the warp and weft in the fabric. The paper analysed the parameters at the yield point during tensioning of fabrics with different densities of weft wires, different weft yarns, with applied plain weave and four-wire twill weave. A special problem for predicting the deformation characteristics of textile materials is their anisotropic properties, so the results were analysed in the direction of the warp, in the direction of the weft and the diagonal direction. A comparative analysis of the parameters at the yield point of fabrics in plain weave and four-wire twill weave, produced on the same basis in the weaving process, is given. Based on the obtained results, dependencies were proposed that can be used to predict the yielding of the corresponding fabrics in plain weave and four-wire twill weave, when the fabric is stretched in the direction of the warp, in the direction of the weft and at an angle of 45o.
No takes yet. Share an insight, caveat, or question.
Stepanović et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: