Crop-derived cellulose aerogel with in situ anchored ZIF-8@C for synergistic adsorption and photocatalytic mineralization of dye wastewater

This is the authors' abstract. We don't add key points for this paper.

Renewable polysaccharides such as cellulose are abundant and inexpensive yet remain underexplored for conversion into robust multifunctional water-treatment materials. Herein, a cellulose-based composite aerogel was fabricated from deacetylated cellulose acetate (DCA) nanofibers, with sodium alginate (SA) serving as a minor bio-based crosslinker, and ZIF-8@C was anchored in situ on the scaffold via a mineralization-induced interfacial coordination strategy. This strategy suppressed MOF agglomeration and ensured uniform dispersion of active sites, while the Ca 2+ -crosslinked alginate network provided mechanical integrity and hydrophilicity. The aerogel exhibited a maximum methylene blue (MB) adsorption capacity of 617.32 mg/g following the Langmuir isotherm and pseudo-second-order kinetics, governed by electrostatic attraction, π-π stacking, and pore diffusion. Adsorption pre-concentration of MB around the anchored ZIF-8@C sites shortened the diffusion distance of reactive species and accelerated photodegradation, achieving 99% decolorization and 82.3% total organic carbon (TOC) removal within 6 h (apparent rate constant 0.68 h −1 ), confirming deep mineralization rather than simple decolorization. In real water matrices, the aerogel maintained equilibrium uptakes of 89.8–143.2 mg/g, demonstrating robustness against coexisting ions and dissolved organic matter. After five regeneration cycles, 74.34% removal efficiency was retained with Zn 2+ leaching below 0.05 mg/L, indicating environmental safety during repeated use. This work demonstrates a renewable bio-based route that converts naturally abundant polysaccharides into a low-metal-leaching aerogel platform for complete detoxification of cationic dye wastewater, aligned with cleaner production and circular economy principles.