Answers are grounded in this paper and cite their sources.
Pinholes in the membrane electrode assembly (MEA) of a fuel cell can lead to premature fuel cell failure. The main causes for pinhole formation are contaminant particles, non-uniform stress distribution, and membrane corrosion. In this paper fuel cell performance is compared before and after piercing the MEA with a pin to introduce a pinhole. Experiments revealed that under some operation conditions, the presence of a pinhole did not immediately impact performance. This implies that fuel cell engineers might overlook pinhole damage in its initial stages. However, durability testing shows that the performance of a fuel cell with a pinhole declines faster than that of a fuel cell with an intact MEA. During open circuit voltage measurement, a substantial voltage drop is observed for the fuel cell with a pinhole in the MEA. Simulation results point to the formation of a hot spot in the cathode catalyst layer of the fuel cell at the site of the pinhole. The temperature of the hotspot is 4∼5 K higher than the surrounding area, which is not so high as to impair performance. This explains the steady operation of the fuel cell over a 40-hour run cycle. This study identifies increasing anode pressure as a method for pinhole detection in fuel cell stacks.
No takes yet. Share an insight, caveat, or question.
Lü et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: