Answers are grounded in this paper and cite their sources.
Amine groups are often added to metal–organic frameworks to strengthen CO2 binding, usually at a cost in porosity. We examine this trade-off in MIL-100(Fe) prepared by a fluoride-free hydrothermal route, with 5, 10 or 20 mol% of the trimesate linker in the synthesis replaced by the amine-bearing linker 5-aminoisophthalic acid (AIA). Diffraction showed that the MIL-100 framework was retained and spectroscopy detected amine-related groups, although AIA incorporation was not quantified. Increasing AIA content reduced crystallite size from 43 to 18 nm and BET surface area from 1527 to 435 m2 g-1. At 298 K and 1 bar, the modified materials adsorbed 1.3–1.7 mmol g-1 CO2, against 3.1 mmol g-1 for pristine MIL-100(Fe), although the 5 mol% material approached the uptake of pristine MIL-100(Fe) at 14 bar. They also held CO2 less strongly: the isosteric heat of adsorption (Qst), which indicates how strongly CO2 binds, was 16–30 kJ mol-1 at low loading, rising with AIA content, against ~60 kJ mol-1 for pristine MIL-100(Fe). The pristine material also gave the highest predicted CO2/N2 selectivity (~170, against 18–32 for the others, at 298 K and 1 bar). Under flow, however, the ranking changed: in breakthrough tests with 8 vol% CO2 in N2, the 5 mol% material had twice the dynamic CO2 capacity of pristine MIL-100(Fe) (0.20 vs 0.10 mmol g-1), and commercial Basolite F300 the highest (0.46 mmol g-1). Over 40 cycles between 0.15 and 1 bar, uptake reached a steady level and the 5 mol% material kept its crystallinity and surface area (865 vs 861 m2 g-1). No composition was best on every metric: AIA addition reshapes rather than improves CO2 adsorption in MIL-100(Fe), so capacity, binding strength and flow performance must be judged together.
No takes yet. Share an insight, caveat, or question.
Bahmani et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: