Answers are grounded in this paper and cite their sources.
When a cylindrical lens is rotated away from its prescribed axis, it does not simply weaken: it leaves a new, oblique astigmatism whose size is twice the cylinder power times the sine of the axis error. This paper turns that standard vector result into a fitting tolerance table for workshops without lensmeter verification at every step. Holding residual astigmatism to a stated 0.25 D requires the axis of a 1.00 D cylinder to be set within 7.2 degrees, a 2.00 D cylinder within 3.6 degrees, and a 3.00 D cylinder within 2.4 degrees. A common shop habit of accepting anything inside ten degrees is shown to be harmless for small cylinders and clearly inadequate above about 1.50 D. A low-cost safeguard follows: verify axis against the prescription for every cylinder of 1.50 D or more before the pair leaves the bench. This study is simulated, not measured.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: