Answers are grounded in this paper and cite their sources.
In this paper, we demonstrate two methods for measuring power losses of soft magnetic cores made of nanocrystalline (Fe100-α-bCoαNib)96-y-zCu1Nb3SiyBzalloys at the magnetic induction level Bmax= 300 mT and at the measurement frequency f = 100 kHz. We investigated the possible sources and consequences of measurement errors for the both electronic and simplified calorimetric methods. While the electrical core loss measurement showed more than a factor of 2 higher value for μr ~ 300 sample than for μr ~ 2600, the calorimetric method proved that it is not the case; it is only about 30% higher. This result is interpreted with significantly higher measurement uncertainty of the electrical measurement when the phase angle φ is very close to 900, i.e., when the magnetic core behaves like an almost ideal inductor. The calorimetric measurement error is also gradually increasing as μr is lowered, due to the increasing fraction of the copper wire's Joule heating. The measured data are consistent with the eddy current loss component. It has been demonstrated that the tape thickness plays the most important role for the power loss of these soft magnetic cores.
No takes yet. Share an insight, caveat, or question.
Zámborszky et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: