Answers are grounded in this paper and cite their sources.
Due to the low flowrates involved, bench-scale testing of continuous-flow inline-coagulation (C-IN) for low-pressure membrane (LPM) pretreatment remains a significant challenge. Consequently, previous studies have employed a large number of mixer configurations, however, the influence of mixing strategy on membrane performance is not well established. Accordingly, this study used a bench-scale system to compare floc properties and LPM fouling for C-IN pretreatment using batch and continuous-flow mixing strategies. Continuous-flow configurations included incidental flocculation by a straight pipe, an inline static mixer, and different helically coiled tube flocculators (HCTFs), all operated with and without a rapid mixer. Batch coagulation yielded the lowest fouling rate among alternatives whereas for continuous-flow strategies, rapid mixing with flocculation resulted in lower fouling than rapid mixing or flocculation alone. LPM fouling was strongly influenced by floc characteristics, with higher fouling rates associated with large concentrations of small, more circular flocs. For HCTFs, the Reynolds number was the most important factor affecting floc growth and fouling mitigation, while extended retention times resulted in smaller-sized flocs and greater fouling propensity. Finally, for the zeta-potential-based optimal coagulant dose used, the removal of organics was found to be independent of the employed mixer configuration. This suggests that mixing conditions for C-IN pretreatment can be configured to produce optimized floc properties without compromising the treated water quality. The findings from this study emphasize the importance of mixer selection on C-IN-LPM performance and highlight the need for a more standardized experimental approach to reduce uncertainty in the comparison of results between studies.
No takes yet. Share an insight, caveat, or question.
Ladouceur et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: