Answers are grounded in this paper and cite their sources.
A multifunctional tubular flexible sensor was developed by forming a graphene/styrene-ethylene-butylene-styrene (SEBS) conductive layer on the inner wall of a commercial latex tube through solution mixing, syringe injection, solvent evaporation, and electrode assembly. The protected architecture combines crack-amplified piezoresistive strain sensing, temperature-dependent resistance, and aqueous-environment operation. The sensor exhibited piecewise strain sensitivity over 0–15%, with GF1 values of 11.95–32.74 and GF2 values of 20.24–84.63 across four different calibration specimens (n = 4), and retained distinguishable loading–unloading signals after 12,000 stretching cycles (0–15% strain). Under full immersion, heating from 25.9 to approximately 70 °C yielded an average apparent normalized temperature sensitivity of approximately 2.07% °C−1. After weak-acid and weak-alkali exposure for up to 3 d, representative short-term resistance fluctuations remained below 0.30%; static measurements in water at 8–70 °C remained below approximately 0.56%. Applications included wearable motion sensing, two-level temperature warning, robotic fruit recognition and size classification, and underwater Morse-code input. Segment-level evaluation yielded an overall accuracy of 73.94% for seven fruit classes and 86.3% for four nominal fruit-size classes. For the 52 underwater contact-event segments, the six-class recognition accuracy was 63.46%; when the six labels were collapsed into dot (point) and dash (line) groups, the derived binary accuracy was 71.2%. These application-level classification results are exploratory and do not establish generalization to independent recording sessions.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: