Answers are grounded in this paper and cite their sources.
This paper presents a three-port unidirectional isolated DC–DC converter for high-power applications, featuring two isolated output ports supplied by a single input source. The proposed topology integrates a full-bridge switching stage, a high-frequency transformer with two secondary windings, and independent rectification stages to provide two output voltages. The converter operating principle is analyzed through its main switching stages, and closed-form expressions are derived for the DC voltage gains, inductor design, capacitor design, and voltage and current stresses of the main semiconductor and passive components. In addition, a parameterized expression for the input inductor current ripple is obtained, showing complete ripple cancellation at a duty cycle of 0.5 and identifying the operating points associated with the maximum ripple. A 7.5 kW laboratory prototype with a 260 V input voltage and 800 V and 400 V output ports was developed to experimentally validate the proposed analysis. The experimental results show good agreement with the theoretical prediction. The converter achieves a maximum measured efficiency of 96.81% at approximately 4.5 kW and maintains an efficiency above 96.5% from approximately 3.5 to 7 kW. These results demonstrate the feasibility of the proposed three-port isolated converter for high-power applications.
No takes yet. Share an insight, caveat, or question.
Kattel et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: