Answers are grounded in this paper and cite their sources.
The growing demand for low-carbon construction materials has heightened interest in geopolymer concrete (GPC) as an alternative to ordinary Portland cement (OPC) concrete; however, its performance at elevated temperatures remains an important consideration for structural applications. This study investigates the thermal resistance of GGBS-based and binary GGBS–PFA geopolymer concretes activated using sodium hydroxide and laboratory-synthesised sodium silicate, with OPC concrete included as a reference. Concrete specimens were exposed to temperatures of up to 800 °C, and their thermal performance was evaluated through visual observations, mass loss and residual compressive strength, supported by measurements of initial density, water absorption, sorptivity and porosity. The OPC concrete exhibited progressive strength deterioration, with a 60.58% reduction at 800 °C. In contrast, the geopolymer concretes showed improved strength retention, with the GGBS control and high-activator mixes recording reductions of 27.46% and 25.19%, respectively, at 800 °C. The binary PFA–GGBS concrete demonstrated the highest thermal resistance, exhibiting a 10.79% strength increase at 600 °C and retaining 73.75 ± 0.62 MPa at 800 °C, slightly above its initial strength. Overall, the results demonstrate the potential of GGBS-based geopolymer systems incorporating laboratory-synthesised sodium silicate for applications requiring improved resistance to elevated temperatures.
No takes yet. Share an insight, caveat, or question.
Ravisankar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: