Answers are grounded in this paper and cite their sources.
PEM fuel cells and electrolyzers can support frequency in low-inertia microgrids, but a switched-off unit needs time to start, every start–stop cycle degrades the stack, and a hydrogen chain with about 30% round-trip efficiency drains its tank even at zero net energy exchange. This paper proposes a degradation- and inventory-aware hierarchical frequency controller: a rate-aware tube model predictive control (MPC) power layer; a commitment layer that applies the classical ski-rental rule with break-even times derived from stack degradation and standby costs (commitment cost bounded by twice the offline optimum plus one start, excluding frequency performance); and a hydrogen-inventory layer that shifts the conventional-unit schedule to hold the tank level. On an electrochemical plant with a realistic information structure and 48 unseen test cases, the controller matches the frequency performance of a perfect-foresight commitment at 5% higher cost and reduces the integral absolute frequency error by 26% versus fuel-cell-only standby, 19% versus a tuned hold-time rule and 28–36% versus tuned PI, PID, fractional-order PID, fuzzy and MPC controllers. The gain grows with the electrolyzer start-up time and persists under random plant–model mismatch. Against a hold-time rule tuned on hour-long profiles, however, the frequency advantage is minimal; the remaining benefits are lower cost and the absence of cold electrolyzer onsets. Over ten days, the inventory layer keeps the tank within 1.09–1.29 kg; without it, the tank empties after 17–20 h.
No takes yet. Share an insight, caveat, or question.
Cem Haydaroğlu (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: