Answers are grounded in this paper and cite their sources.
Radial piston pumps are widely used in high-pressure hydraulic drives, industrial machinery, and precision actuation systems because of their high power density and efficient pressure delivery. However, progressive piston–cylinder wear increases internal leakage, degrades pressure and flow regulation, and introduces undesirable shaft-torque fluctuations. In this work, a nine-piston radial piston pump has been mathematically modeled by considering piston kinematics, pressure-dependent leakage, manifold compressibility, load-flow characteristics, and shaft-torque dynamics. Progressive wear has been represented through an increase in piston–cylinder radial clearance from 16 to 32 µm , and the developed model has been validated against published pump data. A Harris Hawks Optimization tuned Fuzzy Fractional-Order PID controller has then been proposed for coordinated pressure–flow regulation and torque-ripple suppression. The complete nonlinear model, optimization procedure, and controller assessment have been implemented in MATLAB. The open-loop analysis has shown that severe wear increases mean leakage by about 67.4%, while pressure, flow, and shaft-torque ripples rise from 0.73%, 0.37%, and 1.95% to 9.55%, 4.88%, and 10.95%, respectively. Under a 9.29–10.79 MPa step demand and severe wear, the proposed HHO-Fuzzy-FOPID reduces the pressure, flow, and torque RMSE by approximately 79.56%, 80.09%, and 66.49% relative to the uncontrolled case. The controller has also maintained bounded actuator action without saturation and stable performance over the complete wear range. The results demonstrate the effectiveness of the proposed approach for robust hydraulic regulation and torque-ripple mitigation in degraded radial piston pump.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: