Answers are grounded in this paper and cite their sources.
ZK60 magnesium alloy, with low density and high specific strength, has great potential for lightweight structural applications; however, its engineering application is limited by severe micro-galvanic corrosion. Previous studies have shown that the degradation behavior of magnesium alloys is strongly influenced by the characteristics and distribution of second phases. In this study, directional solidification (DS) was applied to regulate the microstructure of ZK60 alloy, and the effects of different withdrawal rates (10–200 µm/s) on dendrite evolution, second-phase transformation, and corrosion behavior were systematically investigated. Increasing the withdrawal rate reduced the primary dendrite arm spacing (λ 1 ) from 134.8 µm to 33.8 µm and decreased the characteristic second-phase size (D 70 ) from 12.5 µm 2 to 5.6 µm 2 . Rapid DS suppressed the eutectoid decomposition of metastable Mg 7 Zn 3 , preventing its transformation into the more cathodic MgZn phase. Consequently, coarse continuous MgZn networks were replaced by fine and uniformly distributed Mg 7 Zn 3 nanorods, reducing the micro-galvanic effect between the second phase and Mg matrix. Electrochemical measurements and immersion tests confirmed that this microstructural regulation promoted the formation of a compact Mg(OH) 2 corrosion film and improved corrosion resistance. Furthermore, a composite microstructural parameter Q (Q = λ 1 × D 70 ) was proposed, and a linear empirical model (R 2 = 0.99) was established to predict the corrosion rate. This study reveals the role of rapid directional solidification in stabilizing metastable phases and mitigating micro-galvanic corrosion, providing a potential strategy for developing corrosion-resistant magnesium alloys.
No takes yet. Share an insight, caveat, or question.
Sun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: