Answers are grounded in this paper and cite their sources.
The sustainable supply of primary magnesium, critical material for society’s lightweight and low-carbon transition, is challenged by the huge energy-intensity and environmental burden. Recycling end-of-life (EoL) magnesium shows great resource and environmental advantages. However, the conventional remelting process is insufficient to separate impurity elements contaminated in EoL magnesium products and results in resource downcycling. This study focused on the separation of the aluminum, the most typical alloying element in magnesium alloys, using molten salt electrolysis method. The electrochemical dissolution behavior of aluminum from solid- and liquid-state magnesium anode was investigated, respectively. The results show that aluminum dissolution in solid-state anode electrolysis is strongly phase-depending, whereas is primarily controlled by the intrinsic element’s electrochemical dissolution potential in liquid-state anode electrolysis. Controlling the anode potential below −2.80 V vs. Cl 2 /Cl − (673 K) and −2.10 V vs. Cl 2 /Cl − (943 K), or the anodic current density not exceed 100 mA cm −2 (673 K) and 600 mA cm −2 (943 K), for solid- and liquid-state anode electrolysis, respectively, is critical for magnesium upcycling from aluminum contaminated magnesium to high purity secondary magnesium (>99.95 wt.%) by preventing aluminum dissolution and deposition. The findings provide the theoretical support for the development of efficient and environmentally upcycling process for EoL magnesium.
No takes yet. Share an insight, caveat, or question.
赵国庆 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: