Answers are grounded in this paper and cite their sources.
Polymer electrolytes are promising for high‐energy and safe lithium–metal batteries yet limited by inadequate mechanical integrity, sluggish Li + transport, and unstable electrode–electrolyte interfaces. Here, we report a covalently integrated MXene–fluorinated gel polymer electrolyte (MF‐GPE) through in situ polymerization. Acrylate‐grafted MXene nanosheets act as chemically anchored crosslinkers within a fluorinated polymer network, distinguishing from conventional physically blended composites. The covalent framework not only mechanically reinforces the polymer matrix but also regulates Li + solvation structure and lowers the activation energy for Li + transport. Consequently, the MF‐GPE enables uniform lithium deposition and constructs robust, inorganic‐rich interphases on both lithium–metal anodes and high‐voltage cathodes. It delivers an ionic conductivity of 3.3 mS cm −1 at 25°C and supports stable cycling of LiNi 0.8 Co 0.1 Mn 0.1 O 2 , LiCoO 2 and LiNi 0.5 Mn 1.5 O 4 cathodes at cut‐off voltages up to 4.9 V. Notably, a MF‐GPE based Li||LiCoO 2 pouch cell achieves cell‐level energy densities of 713.9 Wh kg −1 at 4.8 V and 605.2 Wh kg −1 at 4.6 V, maintaining stable operation over 60 cycles, while 18650 cylindrical cells operate stably for 500 cycles. Ah‐class pouch cells demonstrate outstanding safety under nail‐penetration and overcharge tests. These findings establish covalent MXene‐polymer integration to couple ion solvation structure and interphase stabilization for high‐energy, abuse‐tolerant lithium–metal batteries.
No takes yet. Share an insight, caveat, or question.
Song et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: