Answers are grounded in this paper and cite their sources.
Purpose This study aims to develop and validate a modified denim sulphur over-dyeing route to reduce water use while retaining the physical and aesthetic quality of the final fabric. The aim is to improve sustainability while using the existing, conventional industrial machinery. Design/methodology/approach A two-stage approach was used: lab-scale screening followed by industrial-scale comparison. Eight over-dyeing conditions were tested using powder and pre-reduced sulphur dyes, with cross-linker applied either before or after dyeing. Performance was assessed through crock fastness and the number of post-washes needed to remove dye bleeding; then the best route was scaled up on a Goller Pad-Steam machine using 500 m fabric runs. Findings The modified process package, incorporating cross-linker application after over-dyeing with pre-reduced sulphur dyes, reduced the required post-washes from seven to three on an industrial scale. In a 500 m trial, this resulted in a 57% reduction in static volume and a 49.5% reduction in total process water during the post-washing stage, without compromising tensile strength, tear strength, dimensional stability or colour fastness after rinse and bleach treatments. Practical implications The process gives denim manufacturers a low-disruption way to reduce water use, lower washing demand and improve sustainability while keeping product quality within commercial limits. Originality/value The study offers a practical sulphur over-dyeing modification that can be adopted on current production lines. Unlike work that remains at laboratory scale or depends on specialised equipment, this route was validated on full industrial machinery and combines water saving with garment performance and washing compatibility.
No takes yet. Share an insight, caveat, or question.
Bhutto et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: