Answers are grounded in this paper and cite their sources.
In several states, limestone is one of the primary rock types used in roadway construction as pavement base aggregates. Limerock, derived from the in-place weathering of limestone, is another rock commonly found and used in states such as Florida. In recent years, the number of requests for approval of locally mined limerock in Alabama has increased due to potential economic benefits associated with its use. However, the potential moisture sensitivity of limerock is a concern that has not been fully addressed, because it can impact the long-term performance of pavements, which are increasingly affected by climate-related water stressors. Thus, this study evaluated the effect of moisture, over a broad spectrum ranging from a very dry state to complete saturation, on the mechanical behavior of crushed limestone and limerock. The resilient modulus of three limestone aggregates and four limerock aggregates were determined at four different moisture contents, including full saturation. The results demonstrated that the resilient modulus of limestone and limerock increased significantly with decreasing moisture content when drying from the optimum moisture content. When saturated, some limestone and limerock sources experienced substantial reductions in stiffness, whereas others did not. Significant reductions occurred in aggregate sources that contained a large number of particles finer than 4.75 and/or 0.075 mm and had a high content of claylike materials or plastic fines. These findings are valuable for pavement design and construction material selection to achieve more-sustainable and climate-resilient pavements.
No takes yet. Share an insight, caveat, or question.
Biessan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: