Answers are grounded in this paper and cite their sources.
Counter-rotating axial compressors (CRACs) are increasingly applied in aerospace propulsion and subsea natural gas compression due to their compact structure and high efficiency. However, the combined influence of tip clearance and wet gas conditions on their stall behavior remains unclear. This study numerically investigates how variable tip clearance ratio (TR) affects the stall characteristics of a CRAC under both dry and wet gas operations. Unsteady Reynolds-averaged Navier–Stokes (URANS) simulations, coupled with Proper Orthogonal Decomposition (POD) and frequency-domain analyses, were conducted to capture unsteady flow dynamics and energy modes. The analysis of the tip region reveals that increasing clearance strengthens tip-leakage vortex structures, promotes low-frequency large-scale pressure fluctuations, and drives disturbance propagation from the R2 trailing edge toward the R1 leading edge. POD further shows that, at small clearance, energy is concentrated in low-order, system-scale modes associated with global blockage, whereas larger clearance transfers energy to higher-wavenumber, localized modes linked to spike-type stall development near the R2 leading edge. Results show that increasing tip clearance enhances tip leakage flow, expands low-frequency unsteadiness, and accelerates stall onset. A moderate clearance (1TR) stabilizes the flow, while a large clearance (1.1TR) induces strong tip-leakage vortices, severe blockage, and earlier stall. Under wet gas conditions, efficiency improves slightly due to heat transfer enhancement, but secondary flow losses and instability intensify at larger clearances. The findings provide physical insights and design guidance for improving the stability and reliability of CRACs in harsh operating environments.
No takes yet. Share an insight, caveat, or question.
An et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: