Answers are grounded in this paper and cite their sources.
Visible light communication (VLC) systems operating in outdoor and high-illumination environments are strongly limited by solar background current, which can saturate the front-end transimpedance amplifier and degrade the signal-to-noise ratio (SNR). This work presents a simulation-based design methodology for an analog front-end for optical receivers operating under strong ambient illumination based on an inductive shunt bias topology that suppresses the DC component associated with ambient light while preserving the useful modulated signal band. The proposed approach is intended for photodiode-based VLC and can be extended to other optical detectors, including position-sensitive devices. The paper develops the physical and circuit-level analysis of the proposed receiver, including the effects of background-induced shot noise, thermal noise from the conditioning network, and voltage/current noise from the operational amplifier. A transfer-function-based design methodology enables the selection of component values for stable operation and controlled bandwidth. For the analyzed design, A separate higher-frequency design point in the MHz range is also analyzed using an alternative component configuration, with a corresponding modification of the low-frequency behavior. The proposed topology is evaluated through analytical development and simulation in MATLAB and SPICE. Compared with a conventional resistive AC-coupled approach, the proposed inductive shunt bias reduces the simulated electronic/conditioning noise within the effective bandwidth from approximately 1.15 mV rms to 0.15 mV rms, corresponding to a reduction of approximately 87%. Under strong background illumination, the total noise is additionally affected by the fundamental photodiode shot-noise contribution. Results indicate that the proposed design methodology provides a viable theoretical and circuit-level framework intended for VLC and optical positioning front-ends operating under strong ambient illumination, prior to hardware prototyping and experimental validation.
No takes yet. Share an insight, caveat, or question.
Galilea et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: